• Lifting stage mechanism
• Podest YP750
• Zoom podest ZP750
• Manual rostrum halfpace type Y
• Scissor lift table 2x1m
• Belt trap BT500
• Chain trap cellar CH500
• Turning mechanism
• Manual and motor hoists
• Batten hoist
• Lighting bar
• Traveling point hoist PH150
• Traveling point hoist PH300
• Point hoist PH300S
• Curtain drives and tracks
• Safes
• Other equipment

Belt trap BT500

Standards
DIN 56950
ČSN 918112

Utilization
Aluminium belt trap is a mobile device and may be used for transporting people or decorations from an upper to a lower (parking) position and vice versa. The belt trap may be installed in a stage floor with the use of engine hoists (but also in other devices e.g. a turntable, a ring or lift tables) or it may be installed in guiding rails for moving under a line of traps. Thanks to its construction the belt trap is easy to store by stock carts. Synchronized operation of connected belt traps is possible only when is used the central control panel.

Device description
Trap is composed of two main parts:
- solid frame bolted from aluminium profiles whose walls are filled with Makrolon desks
- lift platform on moveable bolts also bolted from aluminuium profiles including a power unit

Accessories
stair, railing, bar stitching in the upper position, set for lifting, set for connecting traps, travel, stock carts
 
Technical data

Total dynamic payload	300 kg
Static payload	500 kg/m2
Lifting speed	1 - 80 cm/s
Travel height	1900 - 5000 mm
Size	1000 x 1000 mm
Height	2900 mm
Input	3 kW
Weight	480 kg